Sapwood and Heartwood – Know the Differences

To achieve high-quality woodworking, knowledge about wood is a must. Projects can succeed or fail based on which part of a tree is used. In particular, it’s important to know the difference between heartwood and sapwood.

The Parts of a Tree

Knowing how a tree grows sheds light on which part of a tree is best for your woodworking project. A tree trunk is composed of the following basic parts, listed in order beginning with the outer layer:

  • The bark is dead tissue; and its function is to protect the tree from weather, insects, disease, fire, and injury.
  • The phloem is a thin layer comprised of living cells, and its basic function is to transport food around the tree.
  • The cambium is living tissue. This very thin layer of a tree produces both new phloem on one side and new xylem on the other.
  • The largest part of a trunk is the xylem, which is composed of both sapwood and heartwood.

Wood Slab

What is Sapwood

Sapwood is new wood and is like a pipeline that moves water through the tree up to the leaves. Essentially the working component of a tree, sapwood transports water and sap similar to the way blood flows through our veins, capillaries, and arteries.

You can usually spot the difference between the two distinct parts of the tree’s xylem if you were to view a crosscut of a mature hardwood tree’s trunk. Once you remove the comparatively thin outer layers, the tree is essentially made up of sapwood, which is lighter colored wood, and heartwood, which is darker in color.

Lumber cut from sapwood shrinks considerably as it goes through the drying process. This part of a tree is also far more susceptible to fungus than the center of the trunk.

Cross Cut Wood

The darker, inner wood is heartwood. The outer, lighter portion is sapwood.

What is Heartwood

The central, strong pillar of a tree is heartwood. As new rings of sapwood grow, the inner cells are put out of commission and become heartwood. Although this portion of the tree is dead or retired sapwood, it doesn’t decay. As long as the tree’s outer layers are intact, heartwood remains strong.

What occurs as moisture is no longer transported through the straw-like cells, the pores in Heartwood are filled with organic material. The presence of chemicals called extractives causes the cell walls in heartwood to change color. Extractives are what create the rich color and unique character in the heartwood.

The functional beauty of heartwood for a woodworker is threefold. First, it’s significantly less susceptible to fungus. Secondly, heartwood contains far less moisture than sapwood and will have far less shrinkage when it’s dried. Thirdly, heartwood becomes in some ways as strong as steel as the fibers are bound together.


Free Download – 6 Reasons Your Wood Project Failed

Moisture Content

Regardless of whether the woodworker is working with sapwood or heartwood, the correct moisture content of the wood is critical to meet the demands for the end use of the product being made. A high-quality, accurate moisture meter is, therefore, a must for the serious woodworker.

Both heartwood and sapwood hold moisture. Before drying, heartwood holds far less moisture than sapwood1, but you need to account for the moisture content (MC) in both types of wood. If the MC percentage is too low or high, your work could be damaged as the wood shrinks or expands in the process of equilibrating with its surroundings.

In most cases, you want the wood to reach an MC between 6% to 8% before you start working with it. That’s the suitable MC for most indoor spaces with the HVAC operating. A pinless moisture meter will deliver fast and accurate MC readings without damaging the wood. Take multiple readings across the wood to get the most complete picture of the wood’s MC before you start working with it.

Buy an Orion Meter

1. https://www.thebasicwoodworking.com/why-is-heartwood-darker-in-color-than-sapwood/

Last updated on September 21st, 2021

2 Comments

  1. zakir says:

    who long durable of neem sapwood?

    • Ron Smith says:

      Zakir, the species name of Neem is another name for Indian Lilac, I believe. We have no information in the sapwood durability of this species, but I recommend you contact the Indian Forest Service to attempt to acquire the information you need.

      Here is a link to their website: http://ifs.nic.in

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.